A technician kneeling before an open single wall oven with the lower trim panel removed, checking the wiring behind it with a flashlight while a folded drop cloth covers the kitchen floor

oven repair specialists

Bakes true again.
We’ll bring
the fix.

Practical help for the oven your kitchen is built around.
Tell us what the last bake did. We’ll take care of the repair.

  • Heating and temperature trouble
  • Elements, igniters and sensors
  • Wall, steam and speed ovens

What to expect

Experienced technicians

More than 12 years in appliance repair

Upfront pricing

The cost of the repair in writing, before any work begins

OEM parts on order

Original manufacturer parts ordered against your model number, never third-party substitutes

Warranty on our workmanship

Every repair is backed by a warranty on the work we performed

Your next step
to a working oven.

A few details now.
A little less to worry about.

  1. Say what went wrong

    Choose the appliance and tell us what the oven is or is not doing.

  2. Choose a window

    Select a day and an arrival window that fit around your plans.

  3. Add the address

    Add the address and a phone number we can call ahead of the visit.

The make and model number are on a rating plate, usually on the frame just inside the door or on the edge of the trim. They tell us which oven we are coming out to repair.

or call (844) 407-1890

Four steps,
and no surprises.

The three steps in the form are how you book. These four are what actually happens once a technician is standing in your kitchen.

01

Heat it up first

The technician runs the oven through bake and broil, measures how quickly the cavity heats and how close it holds the setting, and looks at the door seal and hinges before naming any part.

02

The cost before the work

You learn which repair it needs and what it costs before a panel comes off for good. If a new oven is the better choice, you hear that as well.

03

Parts in the van

Bake elements, igniters and temperature sensors are carried on the van. A board or a part specific to one model is ordered by number, so passing it on at booking can spare a second trip.

04

Repaired, then tested hot

Once the part is in, the oven is brought back up to temperature while the technician checks the reading, the fan and the door lock, instead of assuming the job is done.

Familiar brands. Expert care.

For the brands
in your kitchen.

Independent repair service. Not affiliated with, authorized or endorsed by any manufacturer. Brand names and model numbers are the property of their respective owners and are used here for identification only, to describe the appliances we service.

What a repair
usually costs.

A useful test: compare the repair with the cost of a new oven that fits the same cabinet cutout, not just any oven. Wall oven openings differ between makes and generations, and a new unit that does not match can bring carpentry and trim work with it. That hidden cost is why most repairs on a built-in oven are worth doing, and why replacement usually makes sense only when a board is no longer made or the cavity has rusted.

Diagnostic visit: An oven is priced after it has been seen heating.
Read the full cost guide
RepairRelative costNotes
Door hinges, gasket or door glass lowest A pair of hinges or a new gasket is a short job at the bottom of the scale. A replacement glass pane sits a little higher, since the door is taken apart and rebuilt around it.
Bake or broil element low The single most common oven part. A hidden bake element under the floor panel takes longer to reach, and any scorched terminal behind it is replaced at the same time.
Gas igniter, safety valve or burner low A weak igniter is a small part and ends most gas ovens that will not light. The safety valve costs more, and every fitting opened is leak-tested before the visit ends.
Temperature sensor or calibration low Calibration alone needs no part at all. A new sensor is inexpensive and quick to fit from inside the cavity on most wall ovens.
Cooling fan or thermal fuse low The fuse itself is small; the time goes into finding why the oven overheated, which often means sliding it out of the cabinet to reach the fan on top.
Convection fan motor, blade or ring element low to moderate A blade or a ring element stays near the low end. A motor for a premium convection oven, reached through the rear wall or the back of the unit, moves the job toward the middle.
Door lock motor and switches low to moderate The latch assembly is a mid-priced part. Where the self-clean heat also damaged the sensor, the wiring or the fan, those are priced as separate items before any work begins.
Steam generator, pump or tank sensor moderate Descaling is the cheapest outcome. A pump or a sensor is modest, while a new steam generator from a premium maker lifts the job into the middle of the scale.
Control board or touch panel moderate to highest A keypad or ribbon cable sits in the middle. A full control board, especially on a double or premium built-in oven, is among the costliest parts an oven takes.

9 metros,
one appliance.

The house around an oven shapes how it wears: whether gas reaches the kitchen, how old the wiring is, how the cabinet was built around it. These notes are about ovens in each place, not about the place in general.

All service areas

Tampa BayFL · 31 areas

Tampa Bay is humid most of the year, with summer storms that bring outages and power surges that reach an oven's control board. Most homes cook on electricity, hard water scales steam ovens, and near the water the living space is often raised a floor up, so a wall oven is sometimes installed well above ground level.

OrlandoFL · 30 areas

Orlando's housing is largely newer and built to a plan, so a street often shares one wall oven model and its common problems. Vacation homes and short-term rentals put ovens through unfamiliar hands and long idle spells, and hard water is a concern for anyone with a steam oven.

Miami / South FloridaFL · 47 areas

Miami's kitchens are mostly in towers, and those units are almost always electric: the wall oven, often with a speed oven above it, is built into flush cabinetry and serviced in place. Salt air, humidity and summer storm outages all reach the controls, and many owners are here only part of the year, so an oven problem is often found long after it began.

New York MetroNY · 75 areas

New York apartments were built around gas stoves, so a built-in wall oven usually arrives with a renovation, and in a small kitchen it is often a narrow model or a speed oven. Buildings set the hours for any work, soft water keeps steam ovens clean, and new construction is moving toward all-electric kitchens.

HoustonTX · 36 areas

Houston kitchens tend to be big, the double wall oven is common in newer houses, and gas is widely available, so a visit may find a gas cooktop beside an electric oven stack. Long humid summers and storm outages are the local conditions that reach the controls.

ChicagoIL · 50 areas

Chicagoland's housing spans a century, and so do its ovens: gas wall ovens from mid-century remodels, electric double ovens in newer houses, and European units in high-rise renovations. Gas is common in houses, older wiring is a real factor, and winter holidays bring the heaviest baking of the year.

Los AngelesCA · 95 areas

Los Angeles was an early home of the built-in wall oven, and the city still holds every generation of it, from mid-century gas units set into original cabinets to pro-style double ovens in new remodels. Many houses have gas, many kitchens are designed around serious cooking, and salt air is a factor only near the coast.

San DiegoCA · 31 areas

San Diego's mild climate is easy on an oven, but hard water scales steam ovens, and near the coast salt air reaches controls and hinges. Inland planned communities have larger kitchens with double wall ovens, while older coastal cottages often have a single oven fitted into a smaller kitchen.

San Francisco Bay AreaCA · 74 areas

The Bay Area pairs old, narrow houses with some of the most ambitious kitchen remodels in the country, so a Victorian flat may hold a single European wall oven while a Peninsula house runs a column of three. Soft water spares steam ovens most scale, and newer construction has moved away from gas toward all-electric kitchens.

A parent and a child sliding a tray of cookies into an open wall oven together in a bright kitchen
For the heart of your home.

Answers before
you book.

When can a technician look at my oven?
Choose a day and an arrival window on the booking form. Once the request has been looked over, the visit is confirmed with you directly.
Do you work on my make of oven?
Pick the appliance and its type in the form and the makes we cover appear. Keep the model number nearby, because it lets the team check which parts your oven takes.
What helps to have ready before the visit?
The make and model number from the plate inside the door frame, whether the oven runs on gas or electricity, what happened on the last bake, and any code on the display. After that, the form only asks for the address and a number to reach you.
How much does an oven repair cost?
That turns on which part has failed, which model is in the wall and how hard it is to pull out of its cabinet. Ask what the visit costs, and get the repair priced before you approve anything.
Is a built-in oven worth repairing?
Usually, yes. Most oven calls end with a single part — a bake element, an igniter, a temperature sensor, a door lock — and a wall oven is sized to its cabinet, so replacing it can mean new carpentry as well as a new appliance. A failed control board on an older model with discontinued parts is where replacement starts to make sense.
My oven heats but the food comes out underdone. Is that serious?
Rarely. A sensor reading a little low, a calibration that has drifted or a door gasket letting heat escape is far more common than a dead element, and none of those is dangerous. It becomes urgent only if you also smell gas or burning, or the oven keeps heating after you turn it off.

Work out what
you are dealing with.

Split by what you are trying to find out rather than by what part of the appliance it concerns.

All 18 guides

Curious what a repair runs? That question gets a page of its own rather than a paragraph here, because nobody can put a fair number on it before a technician has opened the oven — oven repair cost.

Back to your everyday

Let’s get your oven working again.

Three short steps, a window that suits you, and a price for the actual repair before any work starts.

(844) 407-1890 Schedule a repair