AGA eR7 oven
showing 007
Error 007 on an AGA eR7 means the user control panel is unable to handle the measurements coming from the thermocouples, the probes that tell the cooker how hot each oven and hotplate is.
Mon–Sat, 8am–8pm
- Temperature sensor
- Temperature sensor and calibration
- Source: AGA
Book a visit
Three short steps, about a minute.
or call (844) 407-1890
Loading appointment form…
The appointment form couldn’t load. Please try again.
What 007
actually means.
Error 007 on an AGA eR7 means the user control panel is unable to handle the measurements coming from the thermocouples, the probes that tell the cooker how hot each oven and hotplate is. AGA's service manual says this one calls for the user panel to be replaced.
AGA oven display
What to do when 007 shows on the ovenKind of codeTemperature sensor
The reading from the temperature probe fell outside what the control will trust, or climbed far higher than the setting. A loose connector or a probe that has drifted is ruled out before the control itself, and a reading that runs away means the breaker goes off first.
Usually leads toTemperature sensor and calibration
Baking that comes out burnt or pale at the usual setting, traced to the sensor, its wiring or an oven that simply needs calibrating.
Shows up asOven Temperature Not Accurate
Recipes come out burnt or underdone at the right setting, and an oven thermometer reads far from the dial.
MakeAGA
A British cooking brand best known for cast-iron heat-storage cookers; in the US it sells ranges, and its ovens are the cavities built into them.
SourceAGA eR7 Field Service Manual, USA and Canada (PDF linked from agarangeusa.com owner's guides)
Numbered eR7 codes come from AGA's US field service manual; the owner's guide says only that a code appears on the handset.
Before you book,
in this order.
Each step comes from AGA's own guidance for 007 on its ovens. Follow it to the end: the last card says whether this is a visit.
Note 007 from the handset with its warning triangle.
Do not rely on the oven lights to tell you an oven is at temperature while 007 is logged.
Book a visit; AGA sends this code to its technicians, not to owners.
Still there?
It usually turns into temperature sensor and calibration. Book with the code and the model number.
What not to do
007 is not a thermocouple that has broken on its own. The readings may be fine; it is the panel that cannot make sense of them.
What you may
notice with it.
The oven problems 007 tends to arrive with. Answer these at the oven before anyone is booked.
All problems
Oven Temperature Not Accurate
5 causes, cheapest first
Where 007 usually leads
Temperature sensor and calibration.
AGA
ovens.
A British cooking brand best known for cast-iron heat-storage cookers; in the US it sells ranges, and its ovens are the cavities built into them.
AGA oven repairMore AGA codes
Temperature sensor on other makes
In AGA's own words
Error 7 will occur if the user panel PCB is unable to process thermocouple measurements
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Numbered eR7 codes come from AGA's US field service manual; the owner's guide says only that a code appears on the handset.
AGA 007 oven repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about 007.
Can I clear 007 myself?
Does 007 on an AGA eR7 mean an oven sensor has gone?
Why does the technician want the exact AGA eR7 code number?
Back to your everyday
Still showing 007?
Book with the code exactly as shown, the full model number, and whether you can smell gas or burning — with a code, that is where the diagnosis starts.