Electrolux wall oven
showing F10
On an Electrolux standard wall oven, F10 is the thermal runaway alert: the control has read a higher cavity temperature than normal and shuts down to protect the oven.
Mon–Sat, 8am–8pm
- Heating
- Bake and broil element repair
- Source: Electrolux
Book a visit
Three short steps, about a minute.
or call (844) 407-1890
Loading appointment form…
The appointment form couldn’t load. Please try again.
What F10
actually means.
On an Electrolux standard wall oven, F10 is the thermal runaway alert: the control has read a higher cavity temperature than normal and shuts down to protect the oven. Models with Stone-Baked Pizza have one extra cause, a pizza shield on the wrong rack.
Electrolux oven display
What to do when F10 shows on the ovenKind of codeHeating
The control asked for heat and the cavity did not warm the way it expected. A bake or broil element that has opened or blistered is the usual answer; the wiring to it and the relay that switches it are checked before a board is blamed.
Usually leads toBake and broil element repair
An electric oven that stays cold, bakes only from above or will not broil, traced to the element, its terminals or the relay that feeds it.
Shows up asOven Won't Turn Off
The oven keeps heating after you press cancel or off, or it heats with no mode selected at all.
MakeElectrolux
A Swedish appliance group whose US wall ovens focus on convection cooking and combination oven models.
SourceElectrolux owner support: Oven Error Codes and Alarms Guide (read 24 Sep 2026)
Electrolux's oven code guide gives F10 a standard range oven and wall oven meaning and a separate Stone-Baked Pizza meaning, without naming model numbers.
Before you book,
in this order.
Each step comes from Electrolux's own guidance for F10 on its ovens. Follow it to the end: the last card says whether this is a visit.
Switch the oven off and wait until it is completely cool.
On a Stone-Baked Pizza model, check the shield and rack against the use and care guide (position 7 on many models) and preheat again.
Reset the oven by cutting power at the breaker for 30 seconds; other circuits on that breaker will reset too.
If heat continues with the oven switched off, keep the breaker off and book a visit. Book one as well if F10 returns during everyday cooking.
Still there?
It usually turns into bake and broil element repair. Book with the code and the model number.
What not to do
F10 is not a cleaning reminder or a lock message; Electrolux ties it to temperature alone.
What you may
notice with it.
The oven problems F10 tends to arrive with. Answer these at the oven before anyone is booked.
All problems
Where F10 usually leads
Bake and broil element repair.
Electrolux
ovens.
A Swedish appliance group whose US wall ovens focus on convection cooking and combination oven models.
Electrolux oven repair
In Electrolux's own words
F10 indicates your oven is detecting higher-than-normal temperatures. This is a built-in safety alert to help protect the appliance and ensure safe operation.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Electrolux's oven code guide gives F10 a standard range oven and wall oven meaning and a separate Stone-Baked Pizza meaning, without naming model numbers.
Electrolux F10 oven repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about F10.
Can I clear F10 myself?
Does F10 on an Electrolux mean the oven is dangerous to use?
Why does Electrolux mention a pizza shield for F10?
Back to your everyday
Still showing F10?
Book with the code exactly as shown, the full model number, and whether you can smell gas or burning — with a code, that is where the diagnosis starts.