Frigidaire wall oven
showing F10
Frigidaire calls F10 a thermal runaway: the control has picked up a cavity temperature above the normal range and stops as a safety measure.
Mon–Sat, 8am–8pm
- Heating
- Bake and broil element repair
- Source: Frigidaire
Book a visit
Three short steps, about a minute.
or call (844) 407-1890
Loading appointment form…
The appointment form couldn’t load. Please try again.
What F10
actually means.
Frigidaire calls F10 a thermal runaway: the control has picked up a cavity temperature above the normal range and stops as a safety measure. On ovens with Stone-Baked Pizza, a pizza shield placed on the wrong rack can bring up the same code.
Frigidaire oven display
What to do when F10 shows on the ovenKind of codeHeating
The control asked for heat and the cavity did not warm the way it expected. A bake or broil element that has opened or blistered is the usual answer; the wiring to it and the relay that switches it are checked before a board is blamed.
Usually leads toBake and broil element repair
An electric oven that stays cold, bakes only from above or will not broil, traced to the element, its terminals or the relay that feeds it.
Shows up asOven Won't Turn Off
The oven keeps heating after you press cancel or off, or it heats with no mode selected at all.
MakeFrigidaire
A long-established American brand, now part of Electrolux, selling everyday single, double and combination wall ovens.
SourceFrigidaire owner support: Oven Error Codes and Alarms Guide (read 24 Sep 2026)
Frigidaire's oven code guide lists F10 for standard range ovens and wall ovens, with a separate note for ovens that have the Stone-Baked Pizza feature. The guide names no model numbers.
Before you book,
in this order.
Each step comes from Frigidaire's own guidance for F10 on its ovens. Follow it to the end: the last card says whether this is a visit.
Turn the oven off and let it cool completely before you use it again.
If you were baking with the pizza shield, move it to the rack position your use and care guide gives (rack 7 on many models) and start the pizza preheat again.
Clear the display by cutting power for 30 seconds at the breaker.
If the oven keeps heating after you turn it off, leave the breaker off and book a visit; do the same if F10 returns on an ordinary bake.
Still there?
It usually turns into bake and broil element repair. Book with the code and the model number.
What not to do
F10 says nothing about the door or its lock. It is about the temperature the control reads inside the cavity.
What you may
notice with it.
The oven problems F10 tends to arrive with. Answer these at the oven before anyone is booked.
All problems
Where F10 usually leads
Bake and broil element repair.
Frigidaire
ovens.
A long-established American brand, now part of Electrolux, selling everyday single, double and combination wall ovens.
Frigidaire oven repair
In Frigidaire's own words
F10 indicates your oven is detecting higher-than-normal temperatures. This is a built-in safety alert to help protect the appliance and ensure safe operation.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Frigidaire's oven code guide lists F10 for standard range ovens and wall ovens, with a separate note for ovens that have the Stone-Baked Pizza feature. The guide names no model numbers.
Frigidaire F10 oven repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about F10.
Can I clear F10 myself?
Can a pizza stone setting really cause F10 on a Frigidaire?
Is it safe to keep baking after F10 clears on my Frigidaire wall oven?
Back to your everyday
Still showing F10?
Book with the code exactly as shown, the full model number, and whether you can smell gas or burning — with a code, that is where the diagnosis starts.